A drawer for your filament sample chips. Two slotted lanes hold the chips on edge, sorted however you like, so picking a color is a flip through instead of a dig, and the low side walls leave room for your fingers. The grip prints in, so there is nothing to add. Same outside size as the 1W-0.5H Classic drawer, so it swaps in for one, and the download includes the chip itself: print one per filament and put a label-maker strip on its flat face.
Prints floor-down as exported, with no supports: 0.4 mm nozzle, 0.2 mm layers. The chip in the same download prints flat.
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
1W-0.5H decoded: 59 = collection depth class · 1W = 88mm wide · 0.5H = 28mm installed height
| System size | 1W × 0.5H |
|---|---|
| Installed size | 88 W × 28 H × 59 D mm |
| Holds | Up to 16 filament sample chips on edge, 8 in each of its 2 slotted lanes |
| Print footprint | 75 × 69 mm |
| Print estimate | 24 g PLA · 52 min · 25 g PETG · 56 minEstimated with a Prusa CORE One, 0.4 mm HF nozzle, 0.2 mm layer height. |
| Fits case | MODULITH 59 Case - 1W-0.5H |
| Connects to | MODULITH Rail · QuickLock |
In the listing, look for 59-1W-0.5H (some files write it 59-1W-05H) in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Every starter build has a 3D assembly guide. Same size as a Decor Drawer →
Technical details
The file is in the listing above; this site does not mirror it.
Model version v2611 · Current
One part in this family
One file covers this part: 59 Classic Filament Sample Chip Drawer - 1W-0.5H
View the part - 3D preview, print orientation and specs
Works with this part for 1W-0.5H
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
Slides into the same-size 59 case, in place of a standard drawer of this size.
Optional upgrades
Print one chip per filament and stand them on edge in the lanes, with a label-maker strip on each flat face. The chip is in the same download.
Stand a title piece in a lane ahead of each group of chips to sort them by material. The ready-to-print 3MFs are in the same download.
Compatible alternatives or customization
The standard Classic drawer in this size, with a plain floor.