Shared across all depth collections · one download serves 59 through 270. Faceplates and handles are where a Decor build gets its personality; QuickLock is how everything holds on.
Faceplates
One size grid, five personalities - a faceplate printed once fits the same size Decor drawer in every collection.
Essential Faceplates18 sizes · The free core faceplate · a clean, complete drawer front. No labels or accents, just the standard look.FREE
Classic Faceplates18 sizes · The free Classic series · the grip prints as part of the plate, so there's no handle to bolt on and nothing to buy. No labels or accents. Optional back cover.FREE
EdgeLabel Faceplates18 sizes · Swappable labels and accents with the signature edge-label look · restyle and relabel any drawer in seconds. Built-in handle. Included with the Club.CLUB OR PURCHASE
Classic Pro Faceplates18 sizes · Swappable labels and accents with a classic, premium finish · restyle and relabel any drawer in seconds. Built-in handle. Included with the Club.CLUB OR PURCHASE
Chevron Faceplates18 sizes · The 45 degree chevron runs continuously across drawers · side by side and stacked, the pattern never breaks. Every face strip can take its own filament color in the slicer. Bolt-on handle. Included with the Club.CLUB OR PURCHASE
Faceplate Back Covers18 sizes · Optional back cover, sized to match its faceplate - the same cover fits every faceplate series, on the current open-front Decor drawers. On a legacy closed-front drawer, leave the cover out - the plates fit those only without it. On a Gridfinity Decor drawer, take the tear-away front out first; with it left in, fit the plate without the cover.FREE
Handles
For faceplates without a built-in grip · every handle uses the same 2-screw mount.
Hardware & mounting
Each piece of the mechanism on its own page - the QuickLocks, stoppers, magnet inserts, feet, wall brackets, and the store-bought fasteners.
QuickLockThe connector the system rides on - every case takes one Left and one Right, locking to its neighbors side by side and stacked. No screws between cases; a build comes apart the same way it went together.FREE
QuickLock Bi-DirectionalThe QuickLock for a mixed-depth join: it locks a shallower (shorter-depth) case beneath a deeper case or a deeper under-table rail, where the standard pair would keep sliding. Compress it by hand to install; it then locks in both directions. Never the reverse (a deeper case beneath a shallower one), and not for wall builds.FREE
Drawer StoppersA Left + Right pair in a drawer's outermost positions keeps it from pulling all the way out - they snap into the base of the case above, or the Cover Lower over a top row. Optional: one pair per drawer is the default, extra positions add redundancy, and leaving them out lets drawers lift fully out.FREE
Magnet Inserts2 sizes · The printed halves of the magnetic closure (the Planner's Magnets drawer-close option): one clips to the case back, one to the drawer back, a purchased magnet seats in each and the pair meets as the drawer shuts - retention, not a damped close. Two slot sizes for 10×2mm or 6×2mm magnets - same part otherwise; a Gridfinity Decor drawer takes the 6×2mm size only.FREE
TPU FeetFlexible feet that keep a tabletop build planted. A bottom row of one case takes them in the case's own underside slots; a row of two or more cases takes foot rails, and the feet go into the lower rail. Printed in TPU, or bought as adhesive rubber feet - one or the other, same count and same spots.FREE
Purchased HardwareScrews, nuts, and magnets - sourced from the hardware store, not printed.PURCHASED
Wall Mount Brackets3 sizes · Sectional wall brackets in 1W / 2W / 3W - combine to match any case width, screw them to the wall, and cases hang on the pegs. One bracket set serves every collection; needs wood screws.FREE
Deco Handles
BlockBar Handles
Crystal Handles