MODULITH Purchased Hardware

Screws, nuts, and magnets - sourced from the hardware store, not printed.

Installation guides: Wall Mount Lite · Under-Table Rails
Customizing: Cover Size Adapter · Open Bin Drawer

The hardware list

Standard hardware-store items - nothing exotic. Any equivalent hardware from any store works.

M3×6mm socket head screw

StainlessSteel

Amazon links - I earn a small commission, at no extra cost to you.

M3×12mm socket head screw

StainlessSteel

Amazon links - I earn a small commission, at no extra cost to you.

M3 hex nut

StainlessSteel

Amazon links - I earn a small commission, at no extra cost to you.

M3×6mm button head screw

Buy M3×6 button head

Amazon links - I earn a small commission, at no extra cost to you.

Countersunk wood screws (#6/#8)Two jobs, two lengths. Under a table, #6 × 3/4" (3.5 × 19 mm) is the default - it reaches about 16 mm into the top, so check the surface is thick enough and choose a length that cannot break through. On a wall the right screw length or anchor depends on the wall material.

#6 × 3/4"#8

Amazon links - I earn a small commission, at no extra cost to you.

Magnets 10×2mm or 6×2mm

10×2mm6×2mmN52 10×2mmN52 6×2mm

Amazon links - I earn a small commission, at no extra cost to you.

Adhesive rubber feetA one-for-one alternative to printed TPU feet - same count, same spots, stuck to the flat pads around the slots. Use one or the other, never both.

Rubber feet

Amazon links - I earn a small commission, at no extra cost to you.

As an Amazon Associate I earn from qualifying purchases.