First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH 185 Gridfinity Decor Drawer - 2W-1H
formerly GEN2
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
2W-1H decoded: 185 = collection depth class · 2W = 176mm wide · 1H = 56mm installed height
| System size | 2W × 1H |
|---|---|
| Installed size | 176 W × 56 H × 185 D mm |
| Gridfinity grid | 3 × 4 cells of 42 mm, plus a half-grid channel down the right side |
| Tallest bin | 42 mm overall |
| Print footprint | 176 × 185 mm |
| Print estimate | 106 g PLA · 3 h 13 min · 109 g PETG · 3 h 27 minEstimated with a Prusa CORE One, 0.4 mm HF nozzle, 0.2 mm layer height. |
| Fits case | MODULITH 185 Case - 2W-1H |
| Connects to | MODULITH Rail · QuickLock |
This family is modeled but not published yet - every size arrives together at release.
Assembly in 3D lives in the 3D Build Studio. Same size as a Decor Drawer →
Technical details
Not published yet.
Model version v2609 · Coming soon
Works with this part
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
185 Case - 2W-1HFREESlides into the same-size 185 case - same outside as the Decor drawer of this size.
Recommended additions
Choose one faceplate series · 1 per drawer · The designer has printed several and checked the fit (September 2026); not every one of the 60 sizes has been printed
Takes the Essential Faceplate series in 2W-1H on its front, the same way a Decor drawer does. The tear-away front is optional: left in, the faceplate goes on without a back cover, because the two would interfere. Take the front out and the back cover fits.
Takes the Classic Faceplate series in 2W-1H on its front, the same way a Decor drawer does. The tear-away front is optional: left in, the faceplate goes on without a back cover, because the two would interfere. Take the front out and the back cover fits.
EdgeLabel Decor Faceplate - 2W-1HCLUB OR PURCHASETakes the EdgeLabel Faceplate series in 2W-1H on its front, the same way a Decor drawer does. The tear-away front is optional: left in, the faceplate goes on without a back cover, because the two would interfere. Take the front out and the back cover fits.
Classic Pro Decor Faceplate - 2W-1HCLUB OR PURCHASETakes the Classic Pro Faceplate series in 2W-1H on its front, the same way a Decor drawer does. The tear-away front is optional: left in, the faceplate goes on without a back cover, because the two would interfere. Take the front out and the back cover fits.
Chevron Decor Faceplate - 2W-1HCLUB OR PURCHASETakes the Chevron Faceplate series in 2W-1H on its front, the same way a Decor drawer does. The tear-away front is optional: left in, the faceplate goes on without a back cover, because the two would interfere. Take the front out and the back cover fits.
Optional upgrades
Drawer StoppersFREEKeeps this drawer from pulling all the way out - one Left + Right pair in the outermost positions, snapped into the case above or the Cover Lower over a top row. Extra positions add redundancy.
Magnet InsertsFREEOptional magnetic closure (retention, not a damped close) - one insert clips to the drawer back, one to the case back, and a purchased magnet seats in each. The 10×2 and 6×2 slot sizes are alternatives within one closure, never both (a Gridfinity Decor drawer has the 6×2 slots only); N52 magnets may need only one pair.
Compatible alternatives or customization
The standard Decor drawer in this size - a plain floor, and it takes the optional back cover.
Choose one handle series · Only with an Essential or Chevron faceplate - Classic, EdgeLabel, and Classic Pro print their grip in
Deco HandleFREEBolts onto an Essential or Chevron faceplate on this drawer - one handle of any series, two M3×6 screws.
BlockBar HandlesFREEBolts onto an Essential or Chevron faceplate on this drawer - one handle of any series, two M3×6 screws.
Crystal HandleFREEBolts onto an Essential or Chevron faceplate on this drawer - one handle of any series, two M3×6 screws.
Explicit incompatibilities
Not for drawers - an extended bay takes no standard drawer. Extenders are height spacers for open bays.