First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH 165 Shelf Insert - 3W
formerly GEN2
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
3W = 264mm on the grid (1W = 88mm)
| System size | 3W |
|---|---|
| Installed size | 264 W × 165 D mm |
| Print estimate | 74 g PLA · 1 h 52 min · 76 g PETG · 1 h 53 minEstimated with a Prusa XL, 0.4 mm HF nozzle, 0.2 mm layer height (too wide for a CORE One bed). |
| Connects to | same-width case |
All 4 sizes live in one listing - in it, look for 165-3W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guide: Shelves and case extenders
Technical details
The file is in the listing above; this site does not mirror it.
Current
Works with this part
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
165 CasesFREEDrops into a same-width 165 case and turns the bay into an open shelf.
Optional upgrades
Shelf Lip - 3WFREEAn optional same-width Shelf Lip clips into the front slots; 240 and 270 decks also take a mid lip.
Compatible alternatives or customization
Also decks an extended bay - a bay raised on same-width Case Extenders takes the same insert.