First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH 240 Shelf Insert - 1W
formerly GEN2
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
1W = 88mm on the grid (1W = 88mm)
| System size | 1W |
|---|---|
| Installed size | 88 W × 240 D mm |
| Print estimate | 34 g PLA · 57 min · 35 g PETG · 58 minEstimated with a Prusa XL, 0.4 mm HF nozzle, 0.2 mm layer height (too wide for a CORE One bed). |
| Connects to | same-width case |
All 4 sizes live in one listing - in it, look for 240-1W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guide: Shelves and case extenders
Technical details
The file is in the listing above; this site does not mirror it.
Current
Works with this part
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
240 CasesFREEDrops into a same-width 240 case and turns the bay into an open shelf.
Optional upgrades
Shelf Lip - 1WFREEAn optional same-width Shelf Lip clips into the front slots; 240 and 270 decks also take a mid lip.
Compatible alternatives or customization
Also decks an extended bay - a bay raised on same-width Case Extenders takes the same insert.