MODULITH 240 Foot Rails
formerly GEN2The base of a tabletop build - two interlocking layers tie the bottom row together when that row is more than one case wide. Sized per collection.
Installation guide: Tabletop Builds
Optional - one M3×12mm socket head screw + M3 nut per 1W locks the foot rails to the cases; they interlock without any hardware · see Purchased Hardware for the exact list.
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
1W = 88mm on the grid (1W = 88mm)
| System size | 1W |
|---|---|
| Installed size | 88 W × 240 D mm |
| Print estimate | 37 g PLA · 1 h 21 min · 38 g PETG · 1 h 23 minEstimated with a Prusa XL, 0.4 mm HF nozzle, 0.2 mm layer height (too wide for a CORE One bed). |
| Connects to | MODULITH Rail · QuickLock |
| Hardware | Optional - one M3×12mm socket head screw + M3 nut per 1W locks the foot rails to the cases; they interlock without any hardware · the hardware list |
All 4 sizes live in one listing - in it, look for 240-1W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guide: Tabletop Builds
Technical details
STL file · 131 KB
Current
Works with this part for 1W
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
240 CasesFREERuns under the bottom row of a tabletop build of 240 cases - needed when that row has two or more cases, and it carries the feet.
The other layer - its pieces tile across the row
Slides into the upper layer from below - both layers run the full width of the row, tiled from 1W and 2W pieces with the seams offset.
Slides into the upper layer from below - both layers run the full width of the row, tiled from 1W and 2W pieces with the seams offset.
Optional upgrades
M3×12mm socket head screwPURCHASEDOptional - screws the foot rails into the case's nut slots; they interlock without any hardware.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.
M3 hex nutPURCHASEDOptional - pairs with the M3×12 foot-rail screw.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.