MODULITH 115 Wall Kit 2W-5H with Shelf

Assembly help: the Wall Mount Lite guide walks the install step by step.

An open shelf and three drawers on the wall for pens, cables and small parts - the shelf on top, two narrow cases and one wide below.

Drawers	3, and one open shelf
To print	39 pieces in 31 print jobs (the Planner shows 45: it also counts 6 optional Side Covers, a finish for the end walls that the kit count leaves out)Some hardware files print both hands in one job - the QuickLock file prints a Left + Right set, the stopper file a Left + Right pair.
Required hardware	4 countersunk wood screws, #6 or #8. Screw length and anchors depend on your wall: go into a stud wherever you can, use wall anchors in drywall with no stud, and any other wall material needs a fixing made for it. The magnets and M3 screws in the list are optional upgrades: magnets only if you add the magnetic closure, screws only to fix the covers in place.The faceplate grip is part of the print.
Load rating	None published, so judge what you store in it and check the fixings yourself. The shelf case hangs on the bracket and carries the cases below it, and the wide case at the bottom ties the narrower ones above it together; that describes how it is built, not a load test.
Overall assembled size	176 × 290 × 145 mm (W × H × D, measured with the bracket and faceplates, without the optional side covers)
Filament and time	About 934 g of filament and 29 h 25 min of printing for every part in the kit as listed below. In one filament that is 1 × 1 kg spool (recommend 2). Each extra colour or material starts a spool of its own. From 925 g on a spool, one more is recommended to leave room for purge and failed prints. The optional drawer stoppers are not counted. Summed from the same estimates the part pages show; your slicer will differ.
Collection	115 Collection - inside drawer depth 101 mm

Get the kit

PrintablesThangs

One listing carries the whole kit - all three 115 wall kits ship in the same download. Every part below is also published on its own page.

3D assembly guideOpen in the Planner

The 3D guide walks every step interactively; the Planner opens this exact layout for resizing or restyling before you print.

Everything in the kit

Each printed part links to its catalog page - the exact files, sizes and a 3D preview. The printed parts and the wood screws make a complete working kit; the magnetic closure (printed clips + purchased magnets) is optional.