First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH 270 Under-Table Rail - 2W section
formerly GEN2
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
2W = 176mm on the grid (1W = 88mm)
| System size | 2W |
|---|---|
| Installed size | 176 W × 270 D mm |
| Print estimate | 82 g PLA · 3 h 29 min · 84 g PETG · 3 h 40 minEstimated with a Prusa XL, 0.4 mm HF nozzle, 0.2 mm layer height (too wide for a CORE One bed). |
| Connects to | The underside of a desk or bench (wood screws) and the top row of cases |
| Hardware | Screws to the underside with countersunk wood screws - #6 × 3/4" (19 mm) is the default; a 3/4" screw reaches about 16 mm into the top, so check the surface is thick enough - minimum 2 + 2 per 1W of section width · the hardware list |
All 4 sizes live in one listing - in it, look for 270-2W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guide: Under-Table Rails
Technical details
STL file · 448 KB
Current
Works with this part
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
One of these hosts
270 CasesFREETakes the top row of 270 cases straight into its channels - the rail carries its own drawer stops for that row; lower rows QuickLock beneath.
Takes a 270 case extender into its channels like a case.
Countersunk wood screws (#6/#8)PURCHASEDScrews the rail to the underside of the surface. #6 × 3/4" (19 mm) is the default; a 3/4" screw reaches about 16 mm into the top, so check the surface is thick enough and choose a length that cannot break through.
#6 × 3/4" →#8 →Amazon links - I earn a small commission, at no extra cost to you.
Compatible alternatives or customization
A shallower (shorter-depth) case can hang beneath this rail on Bi-Directional QuickLocks - the rail stays the deeper piece.
QuickLock AFREECases lock up into the rail with their normal Left + Right pair; lower rows lock to the row above.