First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH Essential Cabinet Door - 1W-5H (Right-Hinged)
formerly GEN2A door that turns an open shelf into a cabinet. It swings on printed hinges that mount inside the side walls, and a magnetic latch holds it shut. One door covers the case and the Case Extenders stacked on it, from 1W-1H to 4W-6H, hinged on the left or the right. A 1H door takes a knob, a taller door a bolt-on handle.
The designer printed the 1W-1H right-hinged Essential door and fitted it with its hardware in November 2026, and it works; every other size follows the same grid rules. Prints face down.
Coming soon
This family is modeled but not published yet - every size arrives together at release.
1W-5H = 88mm on the grid (1W = 88mm)
| System size | 1W × 5H |
|---|---|
| Installed size | 88 W × 280 H mm |
| Door size | 78 wide × 279 tall × 5 thick, mm |
| Hinge side | Right, seen from the front: the mirror image of the left-hinged door |
| Connects to | A cabinet of its size, on printed hinges |
| Hardware | A 1H door takes a knob on one M3×8mm button head screw; a taller door takes a bolt-on handle on two. Each latch holds two 10×2 mm magnets. · the hardware list |
Technical details
legacy ID: GEN2 Essential Door - 1W-5H - Right-Hinged kept stable so old BOMs, share links and marketplace listings keep resolving
Not published yet.
Coming soon
Not published yet.
Coming soon






