MODULITH 165 Tabletop Kit 3W-2H

Assembly help: the Tabletop Builds guide covers the base, the covers, and both ways to fit the feet (printed or adhesive).

Five drawers across three columns - sockets, calipers and hobby bits.

Drawers	5
To print	63 pieces in 52 print jobs (the Planner shows 67: it also counts 4 optional Side Covers that are not released yet)Some hardware files print both hands in one job - the QuickLock file prints a Left + Right set, the stopper file a Left + Right pair.
Required hardware	None - every part of the kit printsThe faceplate grip is part of the print. The magnetic closure and the M3 screws in the list are optional upgrades, not requirements.
Overall assembled size	264 × 140 × 194 mm (W × H × D, measured with feet and faceplates)
Filament and time	About 1350 g of filament and 41 h 22 min of printing for every part in the kit as listed below (roughly one to two spools). The optional drawer stoppers are not counted. Summed from the same estimates the part pages show; your slicer will differ.
Collection	165 Collection - inside drawer depth 151 mm

Get the kit

PrintablesThangs

One listing carries the whole kit - both footprints of the 165 kit ship in the same download. Every part below is also published individually, so either copy of a file is the same file.

3D assembly guideOpen in the Planner

The 3D guide walks every step interactively; the Planner opens this exact layout for resizing or restyling before you print.

Everything in the kit

Each printed part links to its catalog page - the exact files, sizes and a 3D preview. The printed parts alone make a complete working kit; the magnetic closure (printed clips + purchased magnets) and the M3 screws are optional.