MODULITH 240 Tabletop Kit 2W-2H

Assembly help: the Tabletop Builds guide covers the base, the covers, and both ways to fit the feet (printed or adhesive).

Three deep drawers for the desktop - the classic first build.

Drawers	3
To print	39 pieces in 32 print jobs (the Planner shows 43: it also counts 4 optional Side Covers, a finish for the end walls that the kit count leaves out)Some hardware files print both hands in one job - the QuickLock file prints a Left + Right set, the stopper file a Left + Right pair.
Required hardware	None - every part of the kit prints. The magnets and M3 screws in the list are optional upgrades: magnets only if you add the magnetic closure, screws only to fix the covers and foot rails in place.The faceplate grip is part of the print.
Overall assembled size	176 × 140 × 269 mm (W × H × D, measured with feet and faceplates)
Filament and time	About 1158 g of filament and 37 h 21 min of printing for every part in the kit as listed below. In one filament that is 2 × 1 kg spools. Each extra colour or material starts a spool of its own. From 925 g on a spool, one more is recommended to leave room for purge and failed prints. The optional drawer stoppers are not counted. Summed from the same estimates the part pages show; your slicer will differ.
Collection	240 Collection - inside drawer depth 226 mm

Get the kit

PrintablesThangs

One listing carries the whole kit - both footprints of the 240 kit ship in the same download. Every part below is also published individually, so either copy of a file is the same file.

3D assembly guideOpen in the Planner

The 3D guide walks every step interactively; the Planner opens this exact layout for resizing or restyling before you print.

Everything in the kit

Each printed part links to its catalog page - the exact files, sizes and a 3D preview. The printed parts alone make a complete working kit; the magnetic closure (printed clips + purchased magnets) and the M3 screws are optional.