Home / Builds / 59 Wall Kit 3W-2H

MODULITH 59 Wall Kit 3W-2H

Name: MODULITH 59 Wall Kit 3W-2H
Brand: MODULITH
SKU: build:59-wall-3w2h
Availability: InStock

formerly GEN2

FREE 59 CollectionOfficial build

Assembly help: the Wall Mount Lite guide walks the install step by step.

Render of the assembled MODULITH 59 Wall Kit 3W-2H

Five shallow drawers on the wall for cards, bits and small flat parts - three narrow cases on top, a wide and a narrow below.

Drawers	5
To print	54 pieces in 43 print jobs (the Planner shows 58: it also counts 4 optional Side Covers, a finish for the end walls that the kit count leaves out)
Required hardware	6 countersunk wood screws, #6 or #8. Screw length and anchors depend on your wall: go into a stud wherever you can, use wall anchors in drywall with no stud, and any other wall material needs a fixing made for it. The magnets and M3 screws in the list are optional upgrades: magnets only if you add the magnetic closure, screws only to fix the covers in place.
Load rating	None published, so judge what you store in it and check the fixings yourself. Narrow cases go on top because the case walls nearest the support carry hanging weight better; that is design guidance, not a load test.
Overall assembled size	264 × 122 × 89 mm (W × H × D, measured with the bracket and faceplates, without the optional side covers)
Filament and time	About 667 g of filament and 22 h 59 min of printing for every part in the kit as listed below. In one filament that is 1 × 1 kg spool. Each extra colour or material starts a spool of its own. From 925 g on a spool, one more is recommended to leave room for purge and failed prints. The optional drawer stoppers are not counted. Summed from the same estimates the part pages show; your slicer will differ.
Collection	59 Collection - inside drawer depth 45 mm

Get the wall brackets

Printables Thangs

This kit has no single download. The wall brackets come from this listing, with every section width in the same download, and every other part below links its own page.

3D assembly guide Open in the Planner

The 3D guide walks every step interactively; the Planner opens this exact layout for resizing or restyling before you print.

Everything in the kit

Each printed part links to its catalog page - the exact files, sizes and a 3D preview. The printed parts and the wood screws make a complete working kit; the magnetic closure (printed clips + purchased magnets) is optional.

Drawers
4 ×	59 Decor Drawer - 1W-1H
1 ×	59 Decor Drawer - 2W-1H
Cases & Extenders
4 ×	59 Case - 1W-1H Cases QuickLock together.
1 ×	59 Case - 2W-1H Cases QuickLock together.
4 ×	59 Side Cover - 1H optional Optional · covers the exposed sides of the outermost cases (pairs to each case's height via the side dovetails). Most popular with Table Top Kits.
Faceplates & Handles
4 ×	Classic Decor Faceplate - 1W-1H
1 ×	Classic Decor Faceplate - 2W-1H
Hardware
5 sets	QuickLock (Left + Right) Included with each case model, or print from the universal Hardware pack.
10 ×	Magnet Insert (10x2mm) (or the 6x2mm variant) required with magnetic closure One clips to the case back, one to the drawer back · the pair meets for a magnetic catch that pulls the drawer shut and holds it. Wider drawers have extra slots if you'd like to add more.
10 ×	Magnets 10×2mm or 6×2mm required with magnetic closure · hardware store Seat in the magnet clips. Standard strength suits most builds · the N52s hold noticeably harder (can be too strong for smaller drawers).
6 pairs	Drawer Stoppers (Left + Right) optional Optional but recommended · a Left + Right pair per 1W stops a drawer from pulling all the way out. They snap into the base of the case above (or the covers over a top row). Under-table top-row drawers don't need them · the rail has stoppers built in.
Wall Mount
1 ×	Wall Mount Bracket - 3W section All widths are in the same download · sections install side by side to expand the area.
6 ×	Countersunk wood screws (#6/#8) hardware store Hardware store item · 2 screws per 1W. Length and anchors depend on the wall material.
3 ×	59 Cover Upper - 1W Snaps over the Cover Lower for a smooth finished top.
3 ×	59 Cover Lower - 1W required with drawer stoppers Optional on 1W/2W-only builds, but needed for drawer stoppers and rigidity.
3 ×	M3×6mm socket head screw optional · hardware store Optional · secures the covers, 1 per 1W. Socket head · any M3 head style that clears the pocket works.
3 ×	M3 hex nut optional · hardware store Optional · pairs with the M3 cover screws above.