MODULITH 185 Covers
formerly GEN2The cap of a tabletop build - the lower cover carries the drawer stoppers and dovetails, the upper locks the layer, and staggered seams tie the sections into one rigid block. Sized per collection.
Installation guides: Tabletop Builds · Wall Mount Lite
Customizing: Cover Size Adapter
Optional - one M3×6mm socket head screw + M3 nut per 1W locks the covers down; they snap together without any hardware · see Purchased Hardware for the exact list.
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
1W = 88mm on the grid (1W = 88mm)
| System size | 1W |
|---|---|
| Installed size | 88 W × 185 D mm |
| Print estimate | 40 g PLA · 56 min · 41 g PETG · 58 minEstimated with a Prusa CORE One, 0.4 mm HF nozzle, 0.2 mm layer height. |
| Connects to | MODULITH Rail · QuickLock |
| Hardware | Optional - one M3×6mm socket head screw + M3 nut per 1W locks the covers down; they snap together without any hardware · the hardware list |
All 4 sizes live in one listing - in it, look for 185-1W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guides: Tabletop Builds · Wall Mount Lite
Customizing: Cover Size Adapter
Technical details
STL file · 85 KB
Current
Works with this part for 1W
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
One of these hosts
185 CasesFREECaps the top row of a tabletop or wall build of 185 cases - the top-row units lock to it with their QuickLocks.
Caps a 185 case extender too - its top is a normal case interface.
Recommended additions
The other layer - its pieces tile across the row
Sits under the Cover Upper layer and carries the stopper slots and dovetails - optional on 1W/2W-only builds, needed for drawer stoppers and rigidity. Tiled across the whole row with the seams offset from the upper layer.
Sits under the Cover Upper layer and carries the stopper slots and dovetails - optional on 1W/2W-only builds, needed for drawer stoppers and rigidity. Tiled across the whole row with the seams offset from the upper layer.
Optional upgrades
M3×6mm socket head screwPURCHASEDOptional - locks the covers down through the Cover Lower; they snap together without any hardware.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.
M3 hex nutPURCHASEDOptional - seats in the Cover Lower and takes the M3×6 cover screw.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.
Compatible alternatives or customization
QuickLock AFREEThe top-row units lock to the cover above them with their QuickLocks.