First time here? MODULITH is a 3D-printable modular storage system. See how it works
MODULITH 270 Cover Lower - 1W
formerly GEN2
Shows the main printed body in its recommended print orientation - separate pieces (labels, accents) and removable print aids aren't included.
1W = 88mm on the grid (1W = 88mm)
| System size | 1W |
|---|---|
| Installed size | 88 W × 270 D mm |
| Print estimate | 40 g PLA · 1 h 22 min · 41 g PETG · 1 h 24 minEstimated with a Prusa XL, 0.4 mm HF nozzle, 0.2 mm layer height (too wide for a CORE One bed). |
| Connects to | MODULITH Rail · QuickLock |
| Hardware | Optional - one M3×6mm socket head screw + M3 nut per 1W locks the covers down; they snap together without any hardware · the hardware list |
All 4 sizes live in one listing - in it, look for 270-1W in the file list. Same file everywhere it appears; if a kit includes it, either copy works.
Planning a whole build? The Planner lists every file your layout needs.
Installation guides: Tabletop Builds · Wall Mount Lite
Customizing: Cover Size Adapter
Technical details
STL file · 746 KB
Current
Works with this part
What this part needs, takes and mounts with - each link opens the exact size where the size is fixed, otherwise the matching family.
Required to use this part
One of these hosts
270 CasesFREECaps the top row of a tabletop or wall build of 270 cases - the top-row units lock to it with their QuickLocks.
Caps a 270 case extender too - its top is a normal case interface.
Recommended additions
The other layer - its pieces tile across the row
Locks over the Cover Lower layer for a smooth finished top - the upper layer tiles across the whole row from 1W and 2W pieces with its seams offset from the lower layer's; the Planner lists the set.
Locks over the Cover Lower layer for a smooth finished top - the upper layer tiles across the whole row from 1W and 2W pieces with its seams offset from the lower layer's; the Planner lists the set.
Optional upgrades
M3×6mm socket head screwPURCHASEDOptional - locks the covers down through the Cover Lower; they snap together without any hardware.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.
M3 hex nutPURCHASEDOptional - seats in the Cover Lower and takes the M3×6 cover screw.
Stainless →Steel →Amazon links - I earn a small commission, at no extra cost to you.
Compatible alternatives or customization
Drawer StoppersFREECarries the stopper slots for a top-row drawer - the Cover Upper then locks over it.
QuickLock AFREEThe top-row units lock to the cover above them with their QuickLocks.